Table of Contents
Advertisement
Intel Desktop Board D845GVAD2 Product Guide
Boot Device Priority Submenu
Maintenance
The submenu represented in Table 24 is for setting boot devices priority.
Table 24.
Boot Device Priority Submenu
Options
Feature
• Removable Device
st
1
Boot Device
• Hard Drive
nd
2
Boot Device
• ATAPI CD-ROM
rd
3
Boot Device
• Disabled
• SCSI
• PXE
Hard Disk Drives Submenu
Maintenance
The submenu shown in Table 25 is for setting hard disk drives.
Table 25.
Hard Disk Drives Submenu
Feature
st
1
Hard Disk Drive
(Note)
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will
display up to twelve hard disk drives, the maximum number of hard disk drives supported by the BIOS.
56
Main
Advanced
Description
Specifies the boot sequence from the available devices. To specify
boot sequence:
1.
Select the boot device with <↑> or <↓>.
2.
Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
• Removable Device (maximum of four)
• Hard Drive (maximum of 12)
• ATAPI CD-ROM (maximum of four)
Will appear as options if either of these devices are available.
Main
Advanced
Options
Description
Dependent on installed
Specifies the boot sequence from the available hard disk
hard drives
drives. To specify boot sequence:
1.
2.
Security
Power
Security
Power
Select the boot device with <↑> or <↓>.
Press <Enter> to set the selection as the intended
boot device.
Boot
Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Boot
Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
Advertisement
Table of Contents
