Boot Device Priority Submenu - Intel D815EGEWLU - P3 Socket 370 MicroATX Motherboard Specification

Intel Desktop Board D815EGEW Technical Product Specification

4.7.1 Boot Device Priority Submenu

To access this menu, select Boot on the menu bar, then Boot Devices Priority.
Maintenance
The submenu represented in Table 72 is for setting boot devices priority.
Table 72.

Boot Device Priority Submenu

Feature
st
1 Boot Device
nd
2 Boot Device
rd
3 Boot Device
th
(Note 1)
4 Boot Device
Notes:
1. After the predefined boot device types (removable devices, hard drives, and ATAPI CD-ROM drives), the entries in this
list will reflect as many boot entry vector (BEV) boot devices (for example, Intel UNDI, PXE devices) and SCSI
CD-ROM drives as are installed, up to the five BEV boot devices supported by the BIOS.
2. While the predefined boot device types are listed individually in submenus by type, the BEV devices and SCSI
CD-ROM drives are all listed at this level.
104
Main Advanced
Options
• Removable Dev.
• Hard Drive
• ATAPI CD-ROM
• IBA 4.0.19
Slot 010B
• Disabled
Security Power
Description
Specifies the boot sequence from the available types of
boot devices. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
The operating system assigns a drive letter to each boot
device in the order listed. Changing the order of the
devices changes the drive lettering. The default settings
for the first through final boot devices are, respectively,
listed below. The BIOS supports up to sixteen total boot
devices in any combination of the boot device types
below, with respect to these maximums per type.
• Removable Dev. (maximum of four)
• Hard Drive (maximum of twelve)
• ATAPI CD-ROM (maximum of four)
• IBA 4.0.19 Slot 010B (maximum of five)
The boot devices appear in order by type. For example,
assume that the default boot order is preserved and that
seven boot devices of the following types are installed on
the system: two removable devices, two hard drives, two
ATAPI CD-ROMs, and an IBA 4.0.19 Slot 010B device.
Both removable devices would appear as the first and
second boot devices, the two hard drives would appear
as the third and fourth, the two ATAPI CD-ROM drives
would appear as the fifth and sixth, and the IBA 4.0.19
Slot 010B device would appear as the seventh boot
device.
Exit
Boot
Boot Device Priority
Hard Disk Drives
Removeable Devices
ATAPI CDROM Drives
(Note 2)