Summary of Contents for Intel D845GVSR - Desktop Board Motherboard
Page 1
Rev. B User s Guide D845GVSR Motherboard C C O O N N T T E E N N T T S S Chapter 1 Motherboard Description Chapter 2 Using the BIOS Setup Program Chapter 3 Installing Board Options Appendix A Specifications...
Rear Panel Connectors LAN connector Parallel port connector Line-in jack USB connectors PS/2 mouse connector Line-out jack PS/2 keyboard connector Microphone jack Serial port (COM1) connector USB connectors Video connector Motherboard Description...
Entering the Setup Program NOTE NOTE Setup Menu Screen Description Main Allocates resources for hardware components. Advanced Specifies advanced features available through the chipset. Security Specifies passwords and security features. Power Specifies power management features. Boot Specifies boot options and power supply controls. Exit Saves or discards changes to the Setup program options.
Setup Key Description <F1> or <Alt-H> Brings up a help screen for the current item. <Esc> Exits the menu. < > or < > Selects a different menu screen. < > or < > Moves cursor up or down. <Home> or <End> Moves cursor to top or bottom of current menu.
BIOS Setup Program Main Menu Feature Options Description BIOS Revision No options Displays the BIOS revision. Processor Type No options Displays processor type. Processor Speed No options Displays processor Speed. System Bus Speed No options Displays tne system bus speed. System Memory No options Displays the system memory speed.
Advanced Menu Feature Options Description Boot Configuration No options Configures Plug and Play. When selected, displays the Boot Configuration submenu. Peripheral Configuration No options Configures peripheral ports and devices. When selected, displays the Peripheral Configuration submenu. IDE Configuration No options Specifies type of connected IDE devices.
Peripheral Configuration Submenu Feature Options Description Serial Port A • Disabled Configures serial port A. • Enabled Auto assigns the first free COM port, normally COM1, the address 3F8h, • Auto and the interrupt IRQ4. An * (asterisk) displayed next to an address indicates a conflict with another device.
Primary/Secondary IDE Master/Slave Submenus Feature Options Description Drive Installed No options Displays the type of drive installed. Type • Auto Specifies the IDE configuration mode for IDE devices. User allows • User capabilities to be changed. Auto fills-in capabilities from ATA/ATAPI device.
Video Configuration Submenu Feature Options Description AGP Aperture Size • 4MB Sets the aperture size for the video controller. • 8MB • 16MB • 32MB • 64MB • 128MB • 256MB Primary Video • Integrated Selects primary video adapter to be used during boot. Adapter •...
Security Menu Feature Options Description Set Supervisor Password can be up Specifies the supervisor password. Password to seven alphanumeric characters. Set User Password Password can be up Specifies the user password. to seven alphanumeric characters. Password set Supervisor User mode Password during Password to enter mode...
Power Menu Feature Options Description ACPI No options Sets the ACPI power management options. When selected, displays the ACPI submenu. ACPI Submenu Feature Options Description ACPI Suspend • S1 State This is used to enable or disable the feature of booting up the system on State •...
Boot Device Priority Submenu Hard Disk Drives Submenu Feature Options Description 1st Drive Dependent on Specifies the boot sequence from the available hard disk drives. To installed hard specify boot sequence: drives 1. Select the boot device with < > or < >. 2.
ATAPI CD-ROM Drives Submenu Feature Options Description 1st Drive Dependent on Specifies the boot sequence from the available ATAPI CD-ROM drives. installed To specify boot sequence: ATAPI CD-ROM 1. Select the boot device with < > or < >. drives 2.
Changing the Jumper Function/Mode Jumper Setting Configuration The BIOS uses current configuration information and passwords for Normal booting. After the POST runs, Setup runs automatically. The maintenance Configure menu is diplayed. The BIOS attempts to recover the BIOS configuration. A recovery Recovery None diskette is required.
• Two 184-pin 2.5 V DIMM sockets • Each slot supports up to 1 GB memory of 200/266/333 MHz Non-ECC • Unbuffered DDR Synchronous DRAM (DDR SDRAM) Video memory • Use main memory (Intel Dynamic Video Memory Technology) NOTE Main Chipset Intel ®...
Page 34
• Four analog line-level stereo inputs for connection from LINE IN, CD, VIDEO and AUX • Advanced power management Built-in LAN Integrated LAN Media Access Controller in Intel ® 82801DB I/O Controller Hub (ICH4) Controller • PCI Bus Master interface •...
Need help?
Do you have a question about the D845GVSR - Desktop Board Motherboard and is the answer not in the manual?
Questions and answers