Table of Contents
Advertisement
Intel Desktop Board D845GVAD2 Product Guide
Table 12.
Peripheral Configuration Submenu (continued)
Feature
Parallel Port
Mode
Base I/O Address
(This feature is present
only when Parallel Port
is set to Enabled)
Interrupt
(This feature is present
only when Parallel Port
is set to Enabled)
DMA
(This feature is present
only when ECP mode is
selected)
Audio
LAN Device
(This feature is present
only when there is
onboard LAN)
44
Options
Description
• Disabled
Configures the parallel port.
• Enabled
Auto assigns LPT1 the address 378h and the
interrupt IRQ7.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• Output only
Selects the mode for the parallel port. Not available if the
parallel port is disabled.
• Bi-directional
(default)
Output Only operates in AT
• EPP
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed
bi-directional mode.
• 378 (default)
Specifies the base I/O address for the parallel port, if
Parallel Port is Enabled.
• 278
• IRQ 5
Specifies the interrupt for the parallel port, if Parallel Port is
Enabled.
• IRQ 7 (default)
• 1
When mode is set to ECP, specifies the DMA channel.
• 3 (default)
• Disabled
Enables or disables the onboard audio subsystem.
• Enabled (default)
• Disabled
Enables or disables the LAN device.
• Enabled (default)
†
-compatible mode.
Advertisement
Table of Contents
