Table of Contents
Advertisement
Table 14.
Primary/Secondary IDE Master/Slave Submenus (continued)
Feature
PIO Mode
(This feature appears only if
an IDE device is installed)
DMA Mode
Cable Detected
(This option appears only if
an IDE device is installed)
ARMD Emulation Type
(This option appears only if a
Zip drive is installed)
Options
Description
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
• Auto (default)
Specifies Single Word, Multi Word, or Ultra DMA
• SWDMA 0
mode for the drive.
• SWDMA 1
• SWDMA 2
• MWDMA 0
• MWDMA 1
• MWDMA 2
• UDMA 0
• UDMA 1
• UDMA 2
• UDMA 3
• UDMA 4
• UDMA 5
None
Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
• Floppy (default)
Specified ARMD emulation type.
• Hard Disk
Using the BIOS Setup Program
47
Advertisement
Table of Contents
