Base Door Removal
Prerequisite:
Battery Pack Removal
1. Remove four (4) screws securing the base door in place
Figure 3-8. Base Door
2. Slide the base door (A) toward the front of the system and lift away from the system
(Figure
3-8).
Base Door Installation
1. Slide the base door (A) downwards and towards the back of the system
2. Install and secure four (4) screws to the base door. Refer to
3. Install Battery Pack.
ID
A
Machine Maintenance Procedures
A
Size
M2.5*6
(Figure
Quantity
4
3-8).
(Figure
Figure
3-8.
Screw Type
0
0
3-8).
3-13