CAUTION:
!
Make sure all cables and antennas are moved away from the device to avoid
damage during removal.
LCD Module Installation
1. Place the LCD Module on the base assembly. The LVDS cable and the antenna must
be placed above the LCD hinges. Refer to
2. Align LCD hinges with the hinge guides on the Base Assembly. Refer to
3. Install and secure three (3) screws (A) to LCD hinges. Refer to
4. Place the antenna (B) to the cable guides and secure it with the tape (C). Refer to
Figure
3-34.
5. Install Mainboard.
ID
Size
A
M2.5*6
Machine Maintenance Procedures
Figure
3-35.
Quantity
3
Figure
3-35.
Figure
3-34.
Screw Type
3-37
0