HDD (Hard Disk Drive) Module Removal
Prerequisite:
Base Door Removal
1. Find HDD module (A) on the base assembly as shown in
2. Dicsonnect HDD cable from the mainboard connector (D)
3. Pull the tab (B) to release HDD module from mainboard connector (C). Refer to
Figure
3-15.
Figure 3-15. HDD Module
4. Remove HDD cable from HDD connector (E)
5. Remove four (4) screws (F) from HDD bracket (G)
E
Figure 3-16. HDD Module
Machine Maintenance Procedures
B
F
G
F
Figure
3-11.
(Figure
C
D
(Figure
3-16).
(Figure
3-16).
G
0
3-15).
F
3-19