Base Door Removal
Prerequisite:
Battery Pack Removal
1. Remove two (2) screws (A) as shown in Figure 3-10.
Figure 3-10. Lower Cover Door Screws
2. Remove door from lower cover.
Base Door Installation
1. Insert door flanges (B, Figure 3-11) into slots on lower cover.
Figure 3-11. Base Door Flanges
2. Secure door to lower cover with two (2) screws (A) (Figure 3-10).
3. Install battery pack.
Machine Maintenance Procedures
A
ID
Size
A
M2.5x8.0
B
Quantity
Screw Type
2
0
0
3-15