Base Door Removal
Prerequisite:
Battery Pack Removal
1. Locate base door (C) on lower cover as shown in
2. Loosen nine (9) captive screws (A).
3. Remove door from lower cover.
Figure 3-5. Lower Cover with Battery
Base Door Installation
1. Insert door flanges into slots (B) on lower cover. Refer to
2. Secure door to lower cover with nine (9) captive screws (A).
3. Install battery pack.
Machine Maintenance Procedures
A
A
A
A
A
C
B
B
Figure
A
A
A
A
3-5.
D
Figure
3-5.
0
0
3-11