DC-in Jack Removal
Prerequisite:
LCD (Liquid Crystal Display) Module Removal
1. Find DC-in Jack Module (A) on the base assembly. Refer to
2. Remove DC-in Jack Module (A) from the base assembly.
Figure 3-36. DC-in Jack Module
DC-in Jack Installation
1. Place DC-in Jack Module (A) on the base assembly. Refer to
2. Secure DC-in cable to the cable guide on the base assembly
3. Install LCD Module.
3-38
A
Figure
3-36.
Figure
3-36.
(Figure
3-36).
Machine Maintenance Procedures
0
0