Download Print this page

HP D7171A - NetServer - LPr Manual page 2

Hp netserver lxr pro8 post and beep codes
Hide thumbs Also See for D7171A - NetServer - LPr:

Advertisement

HP NetServer LXr Pro8 Error
Messages
200 Failure Fixed Disk
Since the system does not support IDE drives, this error should
never be seen on this system.
210 Stuck Key
One of the keys on the keyboard is stuck. This error code will be
displayed if the user was pressing one of the keys during system
boot.
Action You Can Take
Restart the system and check if the error goes away.
1.
If the error does not go away, replace the keyboard with a
2.
PS/2 compatible keyboard.
211 Keyboard Error
This error will be displayed every time the system is rebooted
and there is a problem with the keyboard.
Actions You Can Take
Check if the keyboard LEDs blink when the system power
1.
is turned on and the system goes through the Power On
Self Test (POST).
If the LEDs do not blink, check if the keyboard is
2.
connected in the correct keyboard port and repeat Step 1.
If the problem still persists, replace the keyboard and
3.
repeat Step 1.
If the problem persists, call your HP service representative
4.
for further assistance.>
212 Keyboard Controller Failed
If this error is displayed on the monitor, the 8042 keyboard
controller on the system board failed its self-test and is not
working.
Actions You Can Take
Retry the test by switching the system power off and on.
1.
If the problem persists, the keyboard controller on the
2.
system board is not working properly or has failed. Call
your HP service representative for further assistance.
213 Keyboard locked -- unlock key switch

Advertisement

loading