HP D7171A - NetServer - LPr Installation Manual page 3

Host Bus Adapter
Model
No. of controllers
Driver
RAID level
Cabinet
RAID arrays
Number of cabinets
FC Array Cards
No. of cards per cabinet
Firmware
Status SCSI ID
Disk SCSI IDs
Disk drives:
Fibre Channel Cables
Hub
Model
Quantity
HP Rack Storage/12
Number of cabinets:
Model
Status SCSI ID
Disk SCSI IDs
Disk drives:
Cables
LANs
HP Fibre Channel Host Bus Adapter - HP D8602A
1
Hhba5100.sys 2.06
0, 1, 3, 5, 10
For SPOFless configurations a fault tolerant RAID type, e.g. RAID 5, is
recommended for all shared storage.
HP NetServer Rack Storage/12FC- D5991A
Not more than eight physical drives per logical array and not more than
eight LUNs are permitted per cluster.
1
HP Fibre Channel Array Controller - D5990A
2 (Requires second card be installed in the Rack Storage/12FC)
4.64-00 or later.
For SPOFless, use 5.46-04
5 (fixed)
0 – 3, 8 – 15 (fixed)
Any HP drive supported by storage enclosure
Optical – Server to Hub Only: 50 meter D6980A
Copper – Server to Hub and/or Shared Storage to Hub:
HP D6976A 6-port fibre channel hub
Or HP P4459A 8-port switch
1
2 for SPOFless with hubs
Optional
1 – 2
HP Rack Storage/12 – D5989B or C plus two D6025B or two D6025C
SCSI cards for each cabinet
5 (fixed)
0 – 3, 8 – 15 (fixed)
Same as HP Rack Storage/12FC
Any HP LVD SCSI cables from the following list:
1 meter D7131A
2.5 meter D6020A
5 meter D6982A
10 meter D6983A
Intra-cluster (Heartbeat) LAN
3
100 meter D6981A
3 meter D6978A
5 meter D6979A
10 meter D7080A
Client LAN