Tools You Need - HP D7171A - NetServer - LPr Installation Manual

The following procedures are required to install the DIMM:
A. Shutting Down and Disconnecting Power
B. Removing Cover 1
C. Disconnecting the BBM, if present
D. Replacing the DIMM
E. Reconnecting the BBM, if present
F. Replacing Cover 1
G. Restarting the HP NetServer

Tools You Need

The following materials are also required to install this upgrade:
Anti-static Service Kit (3M
equivalent) containing a wrist strap, anti-static mat, and cable.
Use this kit to prevent damage to the system from static
electricity.
®
T15 Torx driver
T25 Torx driver (required for systems mounted in HP racks)
4
®
part number 8501/8502/8505 or