HP D7171A - NetServer - LPr Administrator's Manual page 15

Chapter 2
If you plan to manage your HP NetServer using either a direct terminal
connection or via modem, and you have chosen not to use Symantec's
pcANYWHERE32, make sure your terminal emulation software:
Provides remote dial-in and communications features
Is correctly configured for console redirection
Regardless of which communications software you use, the following parameters
apply at the server's COM port
Table 2: Communications Parameters
Parameter
Baud Rate
Data Bits
Stop Bits
Parity
Handshaking
Connect
Disconnect
The remote console's display should closely resemble the characteristics of the
server's display if you use a PC-based, ANSI color terminal emulator that
supports 25-line mode and the IBM PC character set. The table below provides
the terminal settings to use when configuring your communications software for
use with HP Remote Console.
Installing HP Remote Console Redirection
Required
19.2K or 38.4K
8
1
None
XON/XOFF
Assert DCD
Drop DTR
11