Installing Graphic Console Redirection (Windows Nt) - HP D7171A - NetServer - LPr Administrator's Manual

3 Installing Graphic Console
Redirection (Windows NT)
If you want to access an HP NetServer running Windows NT 4.0 and your remote
console is running either Windows NT or Windows 95, you can redirect all the
information displayed on the HP NetServer to your remote console using
pcANYWHERE32.
The following figure shows how the Graphic Console Redirection is setup.
Figure 4: A Typical Installation of Graphics Console Redirection
A window on the console display exactly mimics the display at the NetServer. In
this way, you can take full control of your HP NetServer from the remote console.
However, to enable graphics redirection, pcANYWHERE32 software must be
installed on both the NetServer and the remote console.
NOTE
pcANYWHERE32 graphics console redirection requires your
HP NetServer to be running Windows NT. In addition,
pcANYWHERE32 operates only on consoles running either
Windows 95 or Windows NT.
17