HP D7171A - NetServer - LPr Administrator's Manual page 16

Chapter 2
Table 3: Terminal Emulation Settings
Setting
Emulation
Character Set
Screen Dimensions
Line Wrap
Local Echo
Scroll
Carriage Return
Translation
Backspace Translation
Cursor
Installing and Configuring pcANYWHERE32 at the Remote Console
Although there are several connection options, typically you access the HP
NetServer via a modem. Unless you have decided to use another communications
package, you need to install the pcANYWHERE32 to enable character-based
console redirection at a remote workstation. Note that pcANYWHERE32 console
software is included with the HP NetServer.
To install pcANYWHERE32 at the remote console:
1. Insert the HP NetServer Navigator CD-ROM into your Windows NT or
95 console's CD-ROM drive and choose "Run" from the File menu in
Program Manager, or the Start menu in Windows, and enter:
x: \lxrpro8\utils\pca32\us\disk1\setup.exe
where x : is the drive letter of the CD-ROM drive.
2. After pcANYWHERE32 is installed, restart Windows NT or Windows 95.
3. To run pcANYWHERE32, double-click the pcANYWHERE32 program
icon in the pcANYWHERE32 program group, or choose it from the Start
menu.
4. The first time you start pcANYWHERE32, the Smart Setup Wizard
(shown below) helps you configure your system by prompting you for
basic information such as the COM port (COM 1) and your modem
specifications.
12
Installing HP Remote Console Redirection
Recommended Alternate
ANSI Color Monochrome ANSI/VT-100
Extended PC/IBM PC ANSI
80 x 25 80 x 24
OFF
OFF
ON
None
None
Underline, blinking