ADTRAN Total Access 904 Hardware Installation Manual page 5

Total Access 900 Series Hardware Installation Guide
FCC-Required Information
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of Federal Communications Commission (FCC) rules and
requirements adopted by America's Carriers Telecommunications Association (ACTA). Each
registered interface has a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may temporarily
discontinue service. If possible, advance notification is given; otherwise, notification is given as
soon as possible. The telephone company will advise the customer of the right to file a complaint
with the FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of this equipment. Advance notification and the opportunity
to maintain uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty
information. The telephone company may require this equipment to be disconnected from the
network until the problem is corrected, or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. This equipment is designed to connect to the telephone network or premises wiring using an
FCC-compatible modular jack, which is compliant with Part 68 and requirements adopted by ACTA.
7. The following information may be required when applying to the local telephone company for
leased line facilities:
Registration
Product
Total Access
904/908
US: HDCDENAN4213680L1
T1 Products
Total Access
904/908
T1 plus ADSL US: HDCDL01B4210908L4
Products
Total Access
912/916/924
T1 Products
US: HDCDENAN4213616L1
Total Access
924 with optional
FXO ports
8. The ringer equivalency number (REN) is useful in determining the quantity of devices you may
connect to your telephone line and still have all of those devices ring when your number is called.
In most areas, the sum of the RENs of all devices should not exceed five. To be certain of the
number of devices you may connect to your line as determined by the REN, call your telephone
company to determine the maximum REN for your calling area.
9. This equipment may not be used on coin service provided by the telephone company. Connection
to party lines is subject to state tariffs. Contact your state public utility commission or corporation
commission for information.
61210916L1-34G
Number
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
ADSL, ADSL2, ADSL2+ Modem
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
Analog Loop Start/Ground Start
Copyright © 2010 ADTRAN, Inc.
Service Type REN/SOC
0.1B/6.0N
0.0B/9.0F
FCC-Required Information
FIC
04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
Metallic
04DU9-BN
04DU9-DN
N/A/6.0N
04DU9-1KN
04DU9-1SN
02LS2
02GS2
USOC
RJ-48C
RJ-48C
RJ-48C
RJ-21X
5