HP StorageWorks 2/16 - SAN Switch Installation Manual page 6

Universal rack mount kit installation

Hide thumbs Also See for StorageWorks 2/16 - SAN Switch:

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

Figure 3: Installing the rear mounting brackets (HP System/e rack-left rear upright)

Addendum Pg

— For an HP System/e rack, install each of the two rear mounting brackets

with (2) #10-32 x 1/2-inch Phillips pan-head screws and (2) #10

alignment washers as shown in

Figure

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Storageworks 8b - fc entry switch Storageworks san