Input Status Read Command - Sanyo PLV-HD2000 - 7000 Lumens Manual

PLV-HD2000 Expand Serial Command Functional Specifications

9.6. Input Status Read Command

9.6.1. CR_INPUT Command
Command "CR_INPUT" [CR]
Details Get selected Input No.
Acceptable
Response
Unacceptable
9.6.2. CR_SOURCE Command
Command "CR_SOURCE" [CR]
Details Get selected Source
Acceptable
Response
Unacceptable
"000_%1" [CR]
%1 "1" – "4"
"Error Code" [CR]
"000_%1" [CR]
"DIGITAL" ------------------ DVI Digital Input is selected
"ANALOG" ----------------- Analog Input is selected
"VIDEO" -------------------- Video Input is selected
"S-VIDEO" ----------------- S-Video Input is selected
"SCART" ------------------- SCART input is selected
"HDCP" --------------------- HDCP input is selected
"YC" ------------------------- Y/C input is selected
"YPBPR" ------------------- Y/Pb/Pr input is selected
"YPBCR" ------------------- Y/Cb/Cr input is selected
%1
"SDI1" ----------------------- SDI1 input is selected
"SDI2" ----------------------- SDI2 input is selected
"DUAL1" -------------------- Dual (YcbCr1) input is selected
"DUAL2" -------------------- Dual (YcbCr2) input is selected
"DUAL3" -------------------- Dual (YcbCr3) input is selected
"DUAL4" -------------------- Dual (YcbCr4) input is selected
"DUAL5" -------------------- Dual (RGB1) input is selected
"DUAL6" -------------------- Dual (RGB2) input is selected
"BLANK" -------------------- There is no source
"Error Code" [CR]
39/56