Sanyo PLV-HD2000 - 7000 Lumens Manual page 15

PLV-HD2000 Expand Serial Command Functional Specifications
8.4.11. CF_IMAGE Command
Command "CF_IMAGE_%1" [CR]
"STANDPC" ------- Standard (PC)
"STANDAV" -------- Standard (AV)
"REAL" ------------ Real (Fixed value to display a graphic image with natural tone)
"CINEMA" ----- Cinema (Fixed value to focus on the tone reproduction for movie)
"CUSTOM1" ------------- Image1 (the value set and store by a user)
"CUSTOM2" ------------- Image2 (the value set and store by a user)
%1
"CUSTOM3" ------------- Image3 (the value set and store by a user)
"CUSTOM4" ------------- Image4 (the value set and store by a user)
"CUSTOM5" ------------- Image5 (the value set and store by a user)
"CUSTOM6" ------------- Image6 (the value set and store by a user)
"CUSTOM7" ------------- Image7 (the value set and store by a user)
"CUSTOM8" ------------- Image8 (the value set and store by a user)
"CUSTOM9" ------------- Image9 (the value set and store by a user)
"CUSTOM10" ----------- Image10 (the value set and store by a user)
Select Image Mode (valid only when it is in the normal Power ON status)
Parameter "CUSTOM1" to "CUSTOM10" corresponds to "Image1" to "Image10"
Details displayed in the projector OSD menu on selecting Image.
The value set by this command is stored in EEPROM so that the setting can
remain effective evern after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.4.12. CF_IMAGEADJ Command
Command "CF_IMAGEADJ_%1" [CR]
"RST" ------ Reset adjusted value for the Image.
"STR1" ---- Store current adjusted value to Image1
"STR2" ---- Store current adjusted value to Image2
"STR3" ---- Store current adjusted value to Image3
"STR4" ---- Store current adjusted value to Image4
%1 "STR5" ---- Store current adjusted value to Image5
"STR6" ---- Store current adjusted value to Image6
"STR7" ---- Store current adjusted value to Image7
"STR8" ---- Store current adjusted value to Image8
"STR9" ---- Store current adjusted value to Image9
"STR10" ---- Store current adjusted value to Image10
Reset/Store adjusted value of Image.
(Only valid when it is in the normal Power ON status)
"STR1" – "STR10" corresponds to "Image1" – "Image10" displayed in projector
Details
OSD menu on selecting "Store" for adjusted value of Image. The settig value set
in "Image1" to "Image10" is stored and can be retrieved when turning on the
projector again after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
(Image Adj. value is fixed to factory default for Still Image)
(Image Adj. value is fixed to factory default for Moving Image)
"000"[CR]
"Error Code"[CR]
"000" [CR]
"Error Code" [CR]
15/56