Sanyo PLV-HD2000 - 7000 Lumens Manual page 29

PLV-HD2000 Expand Serial Command Functional Specifications
8.9.5. CF_REAR Command
Command "CF_REAR_%1" [CR]
"ON" ----------------------------- Set Rear to ON
%1
"OFF" --------------------------- Set Rear to OFF
Set/Cancel Rear (valid only when it is in the normal Power ON status)
When Rear is ON, the image is left/right reversed.
Details
The status set by this command is stored in EEPROM of the projector, so its
setting is effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.6. CF_RCODE Command
Command "CF_RCODE_%1" [CR]
%1 "001" – "008" ----------------------------- Specify Code1-8
Select Remote Control Code (valid only when it is in the normal Power ON status)
Details The status set by this command is stored in EEPROM of the projector, so its
setting is effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.7. CF_LANG Command
Command "CF_LANG_%1" [CR]
"ENG" ----------------------------- Select English
"DEU" ----------------------------- Select German
"FRA" ----------------------------- Select French
"ITA" ------------------------------- Select Italian
"ESP" ----------------------------- Select Spanish
"POR" ----------------------------- Select Portuguese
%1
"NED" ----------------------------- Select Dutch
"SVE" ----------------------------- Select Swedish
"CHI" ------------------------------ Select Chinese
"KOR" ----------------------------- Select Korean
"JPN" ------------------------------ Select Japanese
"RUS" ----------------------------- Select Russian
Set language for OSD (valid only when it is in the normal Power ON status)
Details The language set by this command is stored in EEPROM of the projector, so the
selected language is effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
8.9.8. CF_ON-STA Command
Command "CF_ON-STA_%1" [CR]
"ON" ----------------------------- Set Power On Start to ON
%1
"OFF" --------------------------- Set Power On Start to OFF
Set/Cancel Power ON Start (valid only when it is in the normal Power ON status)
Details The status set by this command is stored in EEPROM of the projector, so its
setting is effective even after the power is turned to ALL OFF status.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
29/56