Status Read Command Table; Image Status Read Command Table; Display Status Read Command Table; Video Status Read Command Table - Sanyo PLV-HD2000 - 7000 Lumens Manual

PLV-HD2000 Expand Serial Command Functional Specifications
6． Status Read Command Table

6.1. Image Status Read Command Table

Status read command
CR_BRIGHT [CR]
CR_CONT [CR]
CR_COLOR [CR]
CR_TINT [CR]
CR_SHARP [CR]
CR_GAMMA [CR]
CR_WBAL-R [CR]
CR_WBAL-G [CR]
CR_WBAL-B [CR]
CR_COLTEMP [CR]
CR_NZRED [CR]
CR_PROGV [CR]
CR_IMAGE [CR]
CR_IMGGMD [CR]
CR_APCTRL [CR]
CR_BBAL [CR]

6.2. Display Status Read Command Table

Status read command
CR_FSYNC [CR]
CR_TDOTS [CR]
CR_CLAMP [CR]
CR_H-POS [CR]
CR_V-POS [CR]
CR_DLINE [CR]
CR_DDOTS [CR]
CR_ORGMODE [CR]
CR_MODESTORE [CR]
CR_SETDISPADJ[CR]

6.3. Video Status Read Command Table

Status read command
CR_SERSYS [CR]
Get value of Brightness
Get value of Contrast
Get value of Color
Get value of Tint
Get value of Sharpness
Get value of Gamma
Get Red value of White Balance
Get Green value of White Balance
Get Blue value of White Balance
Get setting status of Color temperature
Get setting status of Noise reduction
Get setting status of Progressive
Get selected Image mode
Get selected Image Gamma mode
Get setting status of Auto Picture Control
Get setting status of Gamma Balance
Get value of Fine Sync
Get value of Total Dots
Get value of Clamp
Get value of Horizontal Position
Get value of Vertical Position
Get value of Display Line
Get value of Display Dots
Get the original signal of the Display mode
Get Free or Stored status for Display Adj. Mode 1-20
Get signal types currently displayed in System menu.
Get currently selected signal. When in Auto mode, it
returns a result by Auto detect
Item
Item
Item
8/56