Commands Modified In V3.1.2 - HP StorageWorks 16-EL - SAN Switch Release Note

See Also
portStatsShow, switchShow

Commands Modified in v3.1.2

The following commands have been modified in v3.1.2:
quietMode
This command sets and clears shell quiet mode.
Synopsis
quietMode [new mode]
Availability
All users (display)
Admin (set and clear)
Description
This command affects the output displayed on the switch's console (serial port or
Telnet session).
By default, quiet mode is turned off and all switch tasks can send output to the
console. Some output is caused by asynchronous events, such as the fabric
reconfiguring, or by devices logging in.
When quiet mode is turned on, only output produced by shell commands is
shown; all asynchronous output produced by other tasks is suppressed. This is
useful when driving a Telnet session via a script that might not expect
asynchronous output.
Operands
The following operand is optional:
newMode
SAN Switch 2/16 Fabric OS 3.1.2 Release Notes
quietMode
switchShow
0 to clear quiet mode (all tasks can print to the console)
1 to set quiet mode (only shell commands can print)
Commands Modified in v3.1.2
19