HP StorageWorks P9000 User Manual page 79

Table 27 RAID Manager error codes for Continuous Access Synchronous (SSB1 is
B901/B90A/B90B/B912/D004) (continued)
Error code Description
(SSB2)
CB71 The Paircreate operation cannot be executed because the P-VOL is an external storage system migration
volume.
CB73 The Paircreate operation cannot be executed because the S-VOL is an external storage system migration
volume.
CB75 The device is not recognized correctly.
CB76 The Paircreate operation cannot be executed because the paths are specified per storage system.
CB77 The used capacity of the Data Retention program product on the secondary system exceeds the license
capacity.
CB78 The Paircreate operation cannot be executed because the specified S-VOL is defined as the command device.
CB7E A request for a Paircreate operation was received. The command was rejected because the specified S-VOL
belongs to a different CLPR than the registered consistency group's CLPR.
CBD0 The Paircreate operation cannot be executed because the P-VOL LUN is a LUSE volume created across
multiple CLPRs.
CBD1 The Paircreate operation cannot be executed because the S-VOL LUN of S-VOL is a LUSE volume created
across multiple CLPRs.
CBD8 A copy pair cannot be created because the specified P-VOL is not the P-VOL of Continuous Access Journal.
CBDA The Paircreate operation cannot be executed because the used capacity of the Data Retention on the
secondary system exceeds the license capacity.
CBDC A request for a Paircreate operation was received in the Continuous Access Synchronous-Continuous Access
Journal combination status. However, the command was rejected because the Mirror ID of Continuous Access
Journal was 0.
CBDD In configuring the Continuous Access Synchronous-Continuous Access Journal multitarget, a request for a
Continuous Access Synchronous Paircreate operation was received. The command was rejected because
the Continuous Access Journal pair was in the process of copying.
CBDE The Paircreate operation cannot be executed because the P-VOL is used by Snapshot.
CBDF The Paircreate operation cannot be executed because the S-VOL is used by Snapshot.
CBE0 The Paircreate operation cannot be executed because the P-VOL is a Snapshot virtual volume.
CBE1 The Paircreate operation cannot be executed because the S-VOL is a Snapshot virtual volume.
CBE2 The Paircreate operation cannot be executed because the P-VOL is a Thin Provisioning Pool-VOL.
CBE3 The Paircreate operation cannot be executed because the S-VOL is a Thin Provisioning Pool-VOL.
CBE7 More than 32,768 pairs cannot be created in one storage system.
CBED A request for a Paircreate operation was received. The command was rejected because the specified S-VOL
was a Continuous Access Journal S-VOL or journal volume.
CBEE A request for a Paircreate was received. The command was rejected because the specified P-VOL was
already created as a Continuous Access Journal pair for differential resync.
Troubleshooting using RAID Manager 79