HP StorageWorks P9000 User Manual page 68

Continuous access synchronous user guide

Hide thumbs Also See for StorageWorks P9000:

Table of Contents

12. At the primary site, establish consistency groups and create the Continuous Access Synchronous

pairs in the original direction. You may use the "none" initial copy option because all P-VOLs

and S-VOLs are synchronized. If there is any possibility that the volumes are not 100%

synchronized, use the Entire Volume initial copy option to be safe.

13. Vary the primary system and P-VOLs online, and start the host operations.

Planning and procedures for disaster recovery

Table of Contents

Troubleshooting