HP StorageWorks P9000 User Manual page 75

Table 27 RAID Manager error codes for Continuous Access Synchronous (SSB1 is
B901/B90A/B90B/B912/D004) (continued)
Error code Description
(SSB2)
C23C The command was rejected because the volume status is other than PAIR or COPY.
C23D The command was rejected because the command for Continuous Access Synchronous synchronous was
issued to the Continuous Access asynchronous volume.
C267 The pair cannot be created because the command was issued to the command device.
C271 The command was rejected because the specified consistency group number is invalid.
C28B The command was rejected because the takeover command was issued to a volume whose status is not
SSWS.
C28C The command was rejected because the secondary system is not registered or the registered information is
invalid.
C28D There is no volume to which the takeover command can be executed.
C28E The command was rejected because an internal logical error has occurred.
C297 The command was rejected because the specified volume is used as an S-VOL.
C2A0 The pair cannot be created because the capacity that is used by program products other than Continuous
Access Synchronous exceeds license capacity.
C2A1 The command was rejected because an internal logical error has occurred.
C2A3 The pair cannot be created because the used capacity exceeds the license capacity.
C2A4 The pair cannot be created because the used capacity exceeds the license capacity.
C2B3 The command was rejected because V-VOL capacity is changing.
C2B4 The command was rejected because an internal logical error has occurred.
C2B5 The pair cannot be created because the Continuous Access Synchronous P-VOL is being initialized by
Business Copy.
C2B6 The command was rejected because the releasing pages in V-VOL is in progress.
C305 A request for a Paircreate operation was received. The command was rejected because the capacity that
is used by Continuous Access Synchronous in the secondary system exceeds license capacity. Check license
capacity, including for related program products.
C30D The volume in the secondary system or another volume that belongs to the same group is changing to Simplex
or Suspend status. Retry the operation after several minutes.
C312 The P-VOL is not in SMPL status.
C313 The P-VOL is not in PSUS status.
C314 The P-VOL is not in SMPL status.
C315 The P-VOL includes PIN data.
C316 The P-VOL is in process of drive copy for failure assistance.
C317 The P-VOL is in process of drive copy for an SVP request.
C318 The P-VOL is terminating the copy task.
C319 The P-VOL is in process of collection copy.
C31A The P-VOL is in process of collection access.
C31B The P-VOL is blocked.
C31C The P-VOL is blocked and impossible to access.
Troubleshooting using RAID Manager 75