HP StorageWorks P9000 User Manual page 81

Pair Status
Suspending
Deleting (releasing)
Hold
Holding
Description
The pair is not synchronized. The pair is in transition from duplex or pending duplex
to suspended. When the suspension is requested (by user, primary storage system, or
secondary storage system), the status of all affected pairs changes to suspending. When
the suspension is complete, the status changes to suspended.
This pair is not synchronized. This pair is in transition from duplex, pending duplex, or
suspended to simplex. When the delete pair operation is requested (by user), the status
of all affected pairs changes to deleting (releasing). When the delete pair operation is
complete, the status changes to simplex.
The pair is ready for the delta resync operation. When the status of the Cnt Ac-J Z
P-VOL is Hold, incoming write data for the Cnt Ac-S Z S-VOL is stored in the master
journal volume.
Operations allowed on the pairs in Hold status:
- Delta resync
- Pair-delete
- Changing pair options
If you are using remote command devices for delta resync, this status indicates that
the conditions to successfully execute the delta resync operation are satisfied.
The pair status is changing to Hold because a pair for delta is being created.
Operations allowed in Holding status: delta resync, pair release, and changing pair
option.
This status is displayed when the environment of the delta resync operation to support
remote command devices is used.
If you execute the delta resync operation on a pair in Holding status, the operation
may fail. If you set the Delta resync Failure option to Entire to in the Change Journal
Option dialog box, all deferential data will be copied to a S-VOL.
Monitor pair activity, status 81