HP StorageWorks P9000 User Manual page 130

Table 27 Volume types that can be shared with Continuous Access Journal Z (continued)
Functions and volumes
Source volume (when
volume migration is in
progress)
Source volume (after volume
migration is finished)
Reserved volume to which
no path is defined
Continuous Access Synchronous Z
M-VOL in Pending duplex
status
M-VOL in Duplex status
M-VOL in Suspend status
M-VOL that is suspended
due to a failure
R-VOL in Pending status
R-VOL in Duplex status
R-VOL in Suspend status
R-VOL in Swapping status
R-VOL that is suspended due
to a failure
Data Exchange
Volume usable by both
mainframe and open
systems
Cache Residency
The volume on which Cache
Residency setting are made
Parallel Access Volumes
Parallel Access Volumes
Virtual LVI
Virtual LVI volume
Notes:
*1: The volume can not be used as a data volume of the Cnt Ac-J Z pair for delta resync operation.
*2: The volume can be used as a S-VOL only when restoring a Cnt Ac-J Z pair or performing a Business Continuity
Manager YKRESYNC REVERSE operation. However, even in this case, the volume can not be used as the S-VOL of
the Cnt Ac-J Z pair for delta resync operation.
*3: This is "No" if more than one primary storage systems and more than one secondary storage system are used for
remote copy (see
*4: For more information on Auto LUN , contact HP Technical Support.
*5: First, create a Cnt Ac-J Z pair and change its status to Suspend. Then, create a Compatible FlashCopy pair by
specifying the Cnt Ac-J Z P-VOL as T-VOL. Note that you cannot resynchronize the Cnt Ac-J Z pair when the volume is
shared by Cnt Ac-J Z (P-VOL) and Compatible FlashCopy (T-VOL).
130 Sharing Continuous Access Journal Z volumes
Can the volumes be used as
P-VOLs?
Yes. Note that volume
migration stops when the
source volume is used as a
P-VOL.
Yes
No
No
*3
Yes
*3
Yes
*3
Yes
No
*3
Yes
*3
Yes
*3
Yes
*3
Yes
No
Yes
Yes
Yes
"Planning for Continuous Access Journal Z with multiple P9500 systems" (page
Can the volumes be used as
S-VOLs?
Yes. Note that volume
migration stops when the
source volume is used as a
S-VOL.
Yes
No
No
No
*2
No
*2
No
No
No
No
*2
No
No
No
Yes
Yes
Yes
Can the volumes be used as
journal volumes?
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
33)).