Pan-Tilt Zoom Control; Pan-Tilt Zoom; Driver Mode Setting - UniVision Canada PICO-2000 User Manual

PAN-TILT ZOOM CONTROL

Pan-tilt Zoom

Driver Mode
Setting
TEC00-014
Using the pan-tilt zoom function, the camera can zoom in or out to adjust the
view angle of the camera for a better image, or it can pan and tilt the camera to
different position of interest for better surveillance.
Click the PTZ icon button besides the "EXIT" button to activate the PTZ panel.
Note:
The camera number setting of the On Site Receiver Driver (OSRD)
should be set up correctly with the same camera number as the
camera attached to it.
Right click the mouse on anywhere of the PTZ Panel, a menu will appear which
can select the MODE, PORT SETTING or EXIT.
Select the MODE item, a sub menu will show up the item MV912RS, Old OSRD
Code, PTZ Receiver Driver and/or other available Custom's option. After your
selection, a tick will appear left to the item.
Note :
To run the pan-tilt function properly, you should match the OSRD
with the selected protocol.
MV912RS must match the OSRD model of MV360.
Old OSRD Code must match the OSRD model of MV561.
PTZ Receiver Driver must match the OSRD model of PTZ100
Pico2000 User Manual (Rev. 3.0) Page 26 of 51