Table of Contents
Advertisement
DISPLAY (THE MULTIPLEXER FUNCTION)
Display control
panel
For Models 104, 309A, 413A & 416
16-Screen mode button
4-Screen mode button
1-Screen mode button
Multi-Screen mode buttons
TEC00-014
PICO-2000 uses a unique Graphical User Interface (GUI) design for display
control. A "DISPLAY" panel is implemented on the upper right hand corner of
the main screen so that the user can interact with the unit more easily.
The "DISPLAY" panel consists of "display mode" buttons, "camera" buttons and
a "sequence" button respectively (see Figure 2-1 for Models 104, 309A, 413A &
416, Figure 2-2 for Models 205A & 208).
All of the push buttons have their individual built-in indicator lights. Once the
button is pressed, it toggles on and off with the indicator light on and off to
indicate its status correspondingly.
Tip:
You are able to know which camera(s) is/are being displayed by the
"DISPLAY" panel indicator lights, and you can press the buttons on
the "DISPLAY" panel to enter your display input right away.
Figure 2-1 (Models 416 & 104)
Tip:
No camera button can be selected prior to the mode selection. User
should click on one of the display mode button first.
Pico2000 User Manual (Rev. 3.0)
Sequence button
Camera buttons
Camera button pressed
down to start display.
Yellow light indicator
represent the camera is
displaying.
Page 10 of 51
Advertisement
Table of Contents
