Table of Contents
Advertisement
16-Screen mode
Rapid Zoom
Full screen display
Sequence
REMOTE ONLINE VIEWING AND PLAYBACK RECORDED VIDEO
The Intelligent
Remote Player
PICO Server Button
TEC00-014
Click on the 16-Screen mode button to select this mode.
All cameras will be displayed simultaneously.
The camera buttons will then all light up in yellow to indicate the selection of all
the cameras.
The camera display in 16-Screen mode is assigned as in Figure 6-2
You can switch any camera display to one-screen display mode rapidly.
Simply double-click on the desired image on screen, and the image of that screen
will be switched to "one screen" mode immediately.
For an example, you can change the camera 3 display from 4-Screen display
mode to 1-Screen display mode by double click the camera 3 image on screen.
You can return to the original display mode by a click on the previous display
mode button.
Click on the "Full Scrn" button to display the video(s) in full screen.
All the control panels and buttons will be hidden and only videos will be
displayed on the screen in order to fully utilize the display area of the monitor.
Right-mouse click on any part of the full screen to restore the normal control
panel display.
Click the "SEQ" button in the "DISPLAY" panel to toggle the sequence function
on or off.
The indicator of the button lights up in yellow to indicate the sequence function.
The function of sequencing is effective for all display modes, except for the 16-
Screen mode.
The user can select individual camera(s) for sequencing display.
For the sequence parameter setup and the implementation example, please see the
"Display Sequencing" under "Option Setting" section of this manual.
Note:
When the unit is in sequence mode, all the camera selection buttons
inside display panel will be inhibited. You should click the "SEQ"
button to off position to re-gain manual access of the camera
selection.
An intelligent remote player is designed to provide online viewing and
playback recorded video functions in the remote client station.
While the remote client is doing online viewing, the Pico2000 will
automatically switch to 16-screen display mode.
Please refer to the Intelligent remote player manual for detailed operation
procedure of the intelligent remote player.
The appearance of the icon of the "PICO Server" button on the PICO200
Main Screen indicates the server is on for Online Viewing & Dialing in.
The user can turn off this service by clicking the button and click the "close"
icon on the menu bar of the control window.
To re-open this service, click the "Utility" button and select the "PICO
SERVER" function. The icon will re-appear in the Main Screen.
Pico2000 User Manual (Rev. 3.0)
Page 14 of 51
Advertisement
Table of Contents
