For Models 205A & 208; 1-Screen Mode; For Model 104 - UniVision Canada PICO-2000 User Manual

For Models 205A & 208
16-Screen mode button
4-Screen mode button
1-Screen mode button
Multi-Screen mode buttons
Tip:
No camera button can be selected prior to the mode selection. User
should click on one of the display mode button first.
Click the 1-Screen mode button to select this mode.

1-Screen mode

Only one camera can be selected for display.
Click the camera button to select camera to display in this mode.
The down button will light up in yellow.
4-Screen mode Click the 4-Screen mode button to select this mode.
Four cameras can be selected for display simultaneously.
Click the camera buttons to select camera(s) to display in this mode.
The down buttons will light up in yellow to indicate the display status.
The camera display in 4-Screen mode is assigned as the following figure for easy
operation.

For Model 104

Camera 1
Camera 3
TEC00-014
Figure 2-2(Model 208)
Figure 3-1
Pico2000 User Manual (Rev. 3.0)
Sequence button
8 split Display Mode,
With 1 Large, Higher
Refresh Rate* plus 7 small
video screen
Camera buttons
Camera 2
Camera 4
Page 11 of 51