Usb Configuration; Pci Pnp - Asus P5QL SE User Manual

User manual
Hide thumbs Also See for P5QL SE:
Table of Contents

Advertisement

Parallel.Port.Mode.[ECP]
Allows you to select the Parallel Port mode. Configuration options: [Normal]
[Bi-Directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP]. This item allows you to set
the Parallel Port ECP DMA. Configuration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Allows you to select parallel port IRQ. Configuration options: [IRQ5] [IRQ7]
2.4.5

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
The USB.Devices.Enabled item shows auto-detected values. If no USB device is
detected, the item shows None.
USB.Functions.[Enabled]
Allows you to enable or disable the USB functions.Configuration options: [Disabled] [Enabled]
USB.2.0.Controller.[Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
Legacy.USB.Support.[Auto]
Allows you to enable or disable support for legacy USB devices. Setting to [Auto] allows
the system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
USB.2.0.Controller.Mode.[HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). This item appears only when you enable the USB.2.0.Controller item.
Configuration options: [FullSpeed ] [HiSpeed ]
2.4.6.
PCI.PnP
The PCI.PnP menu items allow you to change the advanced settings for PCI/PnP devices.
Take caution when changing the settings of the PCI PnP menu items. Incorrect field values
can cause the system to malfunction.
Plug.And.Play.O/S.[No]
When set to [No], BIOS configures all the devices in the system. When set to [Yes] and if
you install a Plug and Play operating system, the operating system configures the Plug and
Play devices not required for boot.Configuration options: [No] [Yes]
2-18
Chapter 2: BIOS setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents