Asus P5QL SE User Manual page 50

The follow items appear only when you set the Ai.Overclocking item to [Manual].
CPU.Frequency.[xxx]
Displays the frequency sent by the clock generator to the system bus and PCI bus. Use the
<+> and <-> keys to adjust the CPU frequency. You can also type the desired CPU frequency
using the numeric keypad. The values range from 200 to 600. Refer to the table below for the
correct Front Side Bus and CPU External Frequency settings.
FSB./.CPU.External.Frequency.Synchronization
Front.Side.Bus
FSB 1600
FSB 1333
FSB 1066
FSB 800
FSB 533
PCI.Express.Frequency.[Auto]
Use the <+> and <-> keys to adjust the PCIe frequency. You can also type the desired PCIe
frequency using the numeric keypad. The value ranges from 90 to 150.
SB.Voltage.[Auto]
Allows you to set the Southbridge voltage. Configuration options: [Auto] [1.1V] [1.2V]
Vcore.Over.voltage.[Auto]
Allows you to set the Vcore Over voltage. Configuration options: [Auto] [+0mV] [+50mV]
[+100mV] [+150mV]
FSB.Termination.Voltage.[Auto]
Allows you to set the FSB termination voltage. Configuration options: [Auto] [1.205V] [1.28V]
CPU.Voltage.[Auto]
Allows you to set the CPU Vcore voltage. Use the <+> and <-> keys to adjust the CPU Vcore
voltage. You can also type the desired CPU Vcore voltage using the numeric keypad. The
value ranges from 0.85000V to 1.55000V with a 0.00625V interval. Configuration options:
[Auto]
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
VCore voltage may damage the CPU permanently, while setting a low VCore voltage may
make the system unstable.
CPU.GTL.Reference.[Auto]
Allows you to set the CPU GTL voltage reference. Configuration options: [Auto] [0.667V]
[0.65V] [0.63V] [0.615V]
Setting a very high voltage may damage the component permanently, while setting a very
low voltage may cause the system to become unstable.
2-14
CPU.External.Frequency
400 MHz
333 MHz
266 MHz
200 MHz
133 MHz
Chapter 2: BIOS setup