Table of Contents
Advertisement
2.4.3.
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the sub-menu.
North Bridge Configuration
Memory.Remap.Feature.[Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD. Configuration options:
[Enabled] [Disabled]
Initiate.Graphic.Adapter.[PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
South Bridge Configuration
Audio.Controller.[Enabled]
Allows you to set the audio controller. Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to select the front panel type. Configuration options: [AC97]
[HD Audio]
2.4.4
Onboard Devices Configuration
Onboard.LAN.[Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard.LAN item is set to [Enabled]. Configuration options:
[Disabled] [Enabled]
JMB368.Controller.[Enabled]
Allows you to enable or disable the JMB368 controller. Configuration options: [Enabled]
[Disabled]
Serial.Port1.Address.[3F8/IRQ4]
Allows you to select the Serial Port1 base address. Configuration options: [Disabled]
[3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
Parallel.Port.Address.[378]
Allows you to select the Parallel Port base addresses. Configuration options: [Disabled] [378]
[278] [3BC]
ASUS P5QL SE
2-17
Hide quick links:
Advertisement
Table of Contents
