Connectors; Rear Panel Connectors - Asus P5QL SE User Manual

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
• If the steps above do not help, remove the onboard battery and move the jumper again
• You do not need to clear the RTC when the system hangs due to overclocking. For
• Due to the chipset limitation, AC power off is required before you use the C.P.R.
P5QL SE
P5QL SE Clear RTC RAM
1.10.

Connectors

1.10.1. Rear.panel.connectors
1
10
1.. PS/2.keyboard.port.(purple). This port is for a PS/2 keyboard.
2.. Parallel.port. This 25-pin port connects a parallel printer, a scanner, or other devices.
3.. LAN.(RJ-45).port. Supported by Gigabit LAN controller, this port allows Gigabit
connection to a Local Area Network (LAN) through a network hub.
1-18
to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut
down and reboot the system, then the BIOS automatically resets parameter settings to
default values.
function. You must turn off and on the power supply or unplug and plug the power cord
before rebooting the system.
2
9
CLRTC
1 2 2 3
Normal Clear RTC
(Default)
8
3
7
Chapter 1: Product introduction
4 5
6