Section 7: Output Modes; Paper Tray/3 Paper Tray Finisher Specifications - Kyocera Mita Vi7360 Instruction Handbook Manual

Output Modes

2 Paper Tray/3 Paper Tray Finisher Specifications

Use only paper that is recommended by us and stored under the environmental
conditions stated for copy quality. Special stock is not guaranteed for reliability or copy
quality. Multi-sheet bypass tray, Interrupt, and Transparency interleaving are
incompatible with finisher use.
This Finisher also accommodates wide paper sizes in addition to the standard sizes
described below. See p. 4-9 ~ p. 4-10.
Finisher Type
Primary (Main) Tray with built-in 2 stapling: moving tray type
Secondary (Sub) Tray
Booklet Tray
Cover Sheet Feeder (option)
Primary (Main) Tray
• Non-Sort Mode
Paper size: 11"x17"~5.5"x8.5"
Paper weight: 16~24 lb; Special stock (65 lb (176 g/m
punch, rag content)
Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
• Sort Mode/Group Mode
Paper size: 11"x17"~5.5"x8.5"
Paper weight: 16~24 lb
Paper capacity for 20 lb: 500 sheets 5.5"x8.5"
• Staple-Sort Mode
Paper size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11"
Paper weight: 16~24 lb
Paper capacity for 20 lb: 1,000 sheets*
Staple capacity: 50 sheets*
Staple position: See p. 7-7.
NOTES:
*1: Variable according to the number of pages to be stapled. See p. 4-9 for detail.
*2: Staple sheet capacity is changeable, and may be set to 45, 40 or 35 by service.
7-2 Output Modes
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
3,000 sheets 8.5"x11", 8.5"x11"R
1,500 sheets 11"x17", 8.5"x14"
1
2 (5.0mm thick or less)
2 cover paper), transparency film, labels, hole