Section 6: Basic Operations; How To Make A Basic Copy; The Basic Screen - Kyocera Mita Vi7360 Instruction Handbook Manual

Basic Operations

How to Make a Basic Copy

The Basic Screen

When power is turned on, the Basic Screen displays after warm-up; when Auto Power
Saver mode is activated; when ECM password is set; when Key counter is used; or
when Auto/Reset mode is manually or automatically restored. All copying selections can
be initiated from the Basic Screen, whether selected with screen keys or conventional
keys, such as Job Memory.
When the Electronic Copy Monitor (ECM) is activated, a valid 8-digit ECM password,
assigned by the key operator, must be entered before copying can be performed. See p.
5-5.
All of the settings in the Basic Screen, except Print Quantity, can be changed by the key
operator in the Initial Setting Menu Screen.
Messages and
Copier Status
Notice message
Folder keys
Output icon
Output Mode keys
The popup menu appears on the Basic Screen to select the basic copying conditions.
NOTE: During the process of successive copying jobs, the message "Warming up" may be displayed in the
message area of the Basic Screen to maintain the copy image quality.
6-2 Basic Operations
Basic Screen
Rotation/Resolution/
600dpi/HDD icon
Basic Mode keys
Status key
Count/Set
indicator
Memory indicator
Special Original
key
Application key
Rotation Off key
Store key