Configuring Night Mode Settings - Lorex Vantage LNC116 Instruction Manual

iPad App
3. Under Status LED, select one of the following:
• Normal: Status and network LED's will function as normal. For details on LED
functions, see "Camera Overview" on page 1.
• Always turn off: Status and network LED's are turned off at all times.
• Turn off after network connected: Status and Network LED's turn on when the
camera is powered on and turn off once a network connection is made.
NOTE: This does not affect the SD LED. Removing the microSD card will turn off the SD
LED, but it will also disable microSD recording.
4. Tap Done to return to the Control menu.
5. Under Motion Sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
Tap Control to return to the Control menu.
NOTE: This setting does not affect the PIR motion detector.
6. Tap Update to save your settings.

6.4.7 CONFIGURING NIGHT MODE SETTINGS

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. In Camera List, tap
100
next to the camera you would like to edit.
Set video motion detection
sensitivity