Lorex Vantage LNC116 Instruction Manual page 97

3. Tap Schedule then Email Alarm.
4. Under Email trigger, select ON to enable email notifications or OFF to disable. Then
under Send Email, select ON to enable email notifications.
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
Tap Email alarm to return to the Email Alarm menu.
NOTE: This setting does not affect the PIR motion detector.
6. Check the following trigger options for email alarms:
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may also select both PIR and Motion to receive alarms from both motion
triggers.
Enable/disable email notifications
Select motion sensitivity for video motion
Select email triggers
Enable/disable email notifications
iPhone App
81