Chapter 3 Configuration
Accessing the Web-based Configuration Interface
(Windows)
To manually set the AirStation advanced settings from a Windows computer, use the procedure
below to log into the AirStation Configuration interface.
1
Click [Start] > [All programs] > [BUFFALO] > [AirStation Utility] > [Ethernet Converter
Manager].
2
3
When this screen appears, enter the
password, then click [OK].
Notes: · By default, the password is "password".
· If you forget your password, hold down
the reset button (page 8) to initialize all
settings. The password will then revert to
"password". Note that all other settings
will also revert to their default values.
Click [Options] > [Launch Web Setting
screen].
- 17 -