Chapter 2 - Installation; Initial Setup (One-Touch Connection); Lan Cable - Buffalo AirStation WLI-H4-D1300 User Manual

Chapter 2 - Installation

Initial Setup (one-touch connection)

To configure your AirStation, follow the procedure below.
1
Turn on the AirStation, then wait one minute.
power outlet
2
Use a LAN cable to connect the LAN port on the AirStation to your computer, television, or
other client device.
TV
AirStation
1) Connect the power supply
2) connect
1) connect

LAN cable

Note : If the power does not turn on even when the AC
adapter is connected, press the Power button on
the rear of the AirStation.
AirStation
1) connect
2) connect
LAN cable
- 11 -
computer