Chapter 4 - Troubleshooting; When Connection To A Wireless Router Is Not Possible; You Forgot The Ssid, Encryption Key, Or Password For The Wireless Network; Restoring The Default Configuration - Buffalo AirStation WLI-H4-D1300 User Manual

Chapter 4 - TroubleShooting

When connection to a wireless router is not possible

• Turn the power for the wireless router off and then on again.
• If the "5 GHz fixed mode" is enabled, turn it off.
• Refer to Chapter 2 to connect this unit to a wireless router.
• Move this unit closer to the wireless router.
• Make sure that your client devices are configured to "obtain an IP address automatically from
DHCP".
• Verify that your web browser is not set to use proxies.
• Restart your wireless router and AirStation.
You forgot the SSID, encryption key, or password
for the wireless network.
• Ask your network administrator about your SSID and encryption settings. These settings must
match the SSID and encryption settings of the wireless router.
• If your wireless router supports AOSS or WPS, try using them to connect to the wireless router.
Instructions for connecting with AOSS or WPS are in page 12.

Restoring the Default Configuration

With the AirStation powered on, hold down this button
for 3 seconds to return it to factory default settings.
- 44 -