Leds; Table 2. System Leds; Table 3. 10/100/1000Base-T Port Leds - Allied Telesis AT-GS950/8 Installation Manual

LEDs

L/A (link/activity)
DPX (duplex mode
for AT-GS950/8
Table 2 describes the system LEDs.
LED
POWER
Table 3 describes the LEDs for the 10/100/1000Base-T ports.

Table 3. 10/100/1000Base-T Port LEDs

LED
SPD (speed)
Switch only)

Table 2. System LEDs

State
Off Either the switch is not receiving power or the
AC input power is outside the normal
operating range.
Blinking The switch is in the process of initializing the
Green management software.
Steady The input AC power is within the normal
Green operating range.
State
Off The port has not established a link with a
network device.
Blinking The port is transmitting or receiving network
Green packets.
Steady The port has established a link to a network
Green device.
Steady The operating speed of the port is 1000
Green Mbps.
Steady The operating speed of the port is 100 Mbps.
Amber
Off The operating speed of the port is 10 Mbps
or the port has not established a link with a
network device.
Steady The port is operating in full duplex mode.
Green
Off The port is operating in half duplex mode.
Description
Description
23