Configuring Your Computer For Tcp/Ip; Configuring Microsoft Windows 7 - EnGenius ENH202 User Manual

4 Configuring Your Computer for TCP/IP

This chapter describes how to configure the TCP/IP settings on a computer that will be used
to configure the ENH202. Because the default operating mode is Client Bridge, an IP address
will not be assigned to the computer/notebook. Therefore, follow the steps below to assign
an IP address to a client's Ethernet adapter.

4.1 Configuring Microsoft Windows 7

Use the following procedure to configure a computer running Microsoft Windows 7.
1. In the Start menu search box, type: ncpa.cpl
2. When the Network Connections List appears, right-click the Local Area Connection icon
and click Properties.