Understanding The Enh202 Leds - EnGenius ENH202 User Manual

1.6 Understanding the ENH202 LEDs

The rear of the ENH202 has two groups of LEDs. One group, labeled INDICATORS, shows the
status of the device. The second group, LINK QUALITY, shows the strength of the link
between the ENH202 and the network. The following table describes the ENH202 LEDs.
LED Color
Power Green
LAN Green
WLAN Green
Link Quality See Status column
Mode Status
OFF= ENH202 is not receiving power.
ON= ENH202 is receiving power.
OFF = ENH202 is not connected to the network.
ON = ENH202 is connected to the network, but not sending or
receiving data.
Blink = ENH202 is sending or receiving data.
Access Point OFF = ENH202 radio is off and the device is not
or Client sending or receiving data over the wireless LAN.
Bridge ON = ENH202 radio is on, and the device is not
Mode sending or receiving data over the wireless LAN.
Blink = ENH202 radio is on, and the device is
sending or receiving data over the wireless LAN.
Access Point Shows the strength of the link between the
or Client ENH202 and the network.
Bridge G = good quality (green).
Mode Y = medium quality (yellow).
R = poor or no link (red).