EnGenius ENH202 User Manual page 31

Wireless Mode
Channel HT Mode
Extension Channel
Channel / Frequency
Auto
AP Detection
Current Profile
Profile Isolation
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 4.1 for more information.
The wireless mode supports 802.11a/n mixed operation. It is
compatible with the most common wireless bands.
The default channel bandwidth is 40 MHz. A larger channel can
provide better transmit quality and speed.
Specify the upper channel or lower channel selection. It may
influence the Auto channel function.
The channel availability is determined by the country's
regulations. The device operates in the 2.4GHz spectrum.
Place a check mark to enable Auto channel selection.
AP Detection can help to select a best channel by scanning the
nearby area.
Configure up to four different SSIDs; it allows for the division of
clients into separate groups to access the network. Press Edit to
configure the profile and place a check to enable an additional
SSID.
Restrict client communications with different VID by selecting the
Radio button.
Press Accept to confirm the changes or Cancel to return to the
previous settings.