Client Bridge Mode - EnGenius ENH202 User Manual

11.2 Client Bridge Mode

Client Bridge Mode functions like a wireless dongle. It must connect to an Access Point/AP
Router to join the network.
192.168.1.10
Client
Please refer to the last section to check the Access Point's configuration.
Client Bridge
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
The Client-Bridge's IP settings must match the Access Point's settings.
192.168.1.1
ENH202
Login to the web-based configuration interface with the default
IP: 192.168.1.1
Select your country or region's regulation.
Select Operation Mode to Client Bridge from System
Properties.
Use site survey to scan channels of the nearby area.
Select the AP that you would like to associate with.
Setup the authentication settings that match to the Access Point's
settings.
Select Apply to process all of the configurations.
192.168.1.2
Access Point /
Wireless Router
Internet