Spanning Tree Settings - EnGenius ENH202 User Manual

8.2 Spanning Tree Settings

Spanning Tree Status
Bridge Hello Time
Bridge Max Age
Bridge Forward Delay
Priority
Accept / Cancel
Accept does not apply the changes – you must go to Status -> Save / Load
to apply the new settings. Please refer to Chapter 4.1 for more information.
Select the Radio button to On or Off to toggle the Spanning Tree
function.
Specify Bridge Hello Time in seconds.
Specify Bridge Max Age in seconds.
Specify Bridge Forward Delay in seconds.
Specify the Priority number; smaller numbers have greater
priority.
Press Accept to confirm the changes or Cancel to return
previous settings.